BizBloqs × RouteLogic

OPTIMISE THE ROUTE. ON LOAD THAT EXISTS.

Route optimisation software is easy to buy and hard to benefit from, because most companies feed it estimated stops and imaginary volumes typed in that morning.

BizBloqs gives RouteLogic the actual colli, pallets and weights per stop, and then loads the van in the sequence the route came back in.

Book a demo Visit RouteLogic

Explore RouteLogic

Visit RouteLogic

IS THIS YOU?

Who this RouteLogic integration is for

You optimise a route for a load you have not verified. The driver discovers the difference.

You deliver with your own vehicles and plan the routes yourself.
Your planned volumes and your actual load regularly disagree.
Delivery outcomes reach the office by phone or WhatsApp rather than by system.

WHAT IS ROUTELOGIC?

ROUTE OPTIMISATION FOR YOUR OWN FLEET

RouteLogic plans and optimises the routes your own vans and trucks drive, against vehicle capacity, driver shifts and delivery windows.

Its output is only as good as the load data it is given — which is a warehouse output, produced during picking and packing.

THE VAN IS LOADED AGAINST THE ROUTE

Loading in BizBloqs is scanned against the trip, in the stop sequence RouteLogic returned, so the driver stops rearranging the load at stop one.

Refusals and damages come back as return receipts, which means the warehouse already knows what is coming back before the van arrives.

OUR SOLUTIONS

SMEGet off paper. Get in control.SME+Multi-channel, multi-warehouse, still fast to change.EnterpriseMulti-entity, deeply integrated, fully auditable.

WHAT CHANGES ONCE ROUTELOGIC AND BIZBLOQS ARE CONNECTED

Stops, load units, optimised routes and delivery results move between BizBloqs and RouteLogic on every planning cycle.

Stops with real load units

Stops are offered with the colli, pallets and weights that were actually picked, so the optimiser plans against physical reality.

Capacity planned on measured volume

Vehicle capacity is used properly because volume and weight per stop are measured rather than assumed.

Loading scanned in stop sequence

Loading is scanned in the returned stop sequence, which alone removes a large share of the time lost at the first two stops.

Route documents per trip

Trip paperwork prints per solution with the right documents per stop, instead of a stack sorted by hand.

Delivery status back on the order

Delivery status, signatures and exceptions are written back onto the order where customer service can see them.

Refusals opened as returns

A refusal becomes an expected return in the warehouse, so goods-in is prepared instead of surprised.

This is what your RouteLogic setup looks like from day one

See it on your own order flow. Thirty minutes, screen share, no slide deck — or tell us where it hurts today and we will tell you honestly whether we can fix it.

Book a demo Talk to sales

Transport integration

How the RouteLogic integration works

RouteLogic optimises the route your own vans and trucks drive. It can only do that well if it knows the real load: BizBloqs supplies the actual colli, pallets and weights per stop instead of an estimate typed in that morning.

RouteLogic — route optimisation

API exchange of stops, load units and route results, plus driver status back

Orders that are picked and ready go up as stops with their load units and delivery windows. RouteLogic returns the optimised route and stop sequence, which BizBloqs uses to drive loading and to print the right paperwork per trip. Delivery status, signatures and refusals come back and are booked against the order — a refused pallet becomes an expected return in the warehouse rather than a surprise on the dock.

What you need

An active RouteLogic environment for your own fleet
API credentials and agreed stop and load definitions
Vehicle capacities and driver shifts maintained in RouteLogic
Agreed cut-off between picking complete and route release

Which messages are exchanged

This is the standard message set between BizBloqs and RouteLogic. Empty fields mean that message is not exchanged in that direction by default; optional rows depend on your modules, licence and process.

RouteLogicBizBloqs WMS

Into BizBloqs

Out of BizBloqs

Transport orderscore

Into BizBloqsPlanned trips, routes and time slots

Out of BizBloqsShipments ready to plan

Load unitscore

Out of BizBloqsPallets, roll containers and colli per shipment

Addresses and time windowscore

Into BizBloqsDelivery windows per stop

Out of BizBloqsDelivery addresses and instructions

Loading sequencecore

Into BizBloqsStop sequence per trip

Out of BizBloqsLoading confirmation per unit

Track & traceoptional

Into BizBloqsTracking link and live ETA per stop

Departure / arrivaloptional

Into BizBloqsETA and arrival confirmation

Out of BizBloqsGate-out confirmation

Proof of deliveryoptional

Into BizBloqsSignature, photo and delivery status

Deviationsoptional

Into BizBloqsRefusals, damages and failed deliveries

Out of BizBloqsReturn receipt in the warehouse

Transport costsoptional

Into BizBloqsRate or cost per trip

This is our standard integration. An empty field means that message is not exchanged in that direction by default. Integrations can be modified or extended customer-specific through workflows.

Track & trace: from label to delivered

A tracking code is only worth something once it reaches the person asking about the order. This is the full relay chain between RouteLogic, BizBloqs and the system your order came from.

The relay chain

1. Shipment offered for planning
Once a shipment is physically ready, BizBloqs offers it to RouteLogic with its real load: pallets, roll containers, colli, weights, address and time window. The planner works with what is actually on the floor instead of an estimate.
2. Trip and stop sequence back
RouteLogic returns the trip with its stop sequence and time slots. BizBloqs drives loading from that sequence — last stop loaded first — and every load unit is scanned onto the trip, so what leaves the dock matches the plan.
3. Tracking reference stored
The trip reference and the customer-facing tracking link or ETA come back from RouteLogic and are stored on the shipment in BizBloqs. From this moment the reference exists in the WMS and can be relayed onwards.
4. Trip status back
Departure, arrival, live ETA and deviations per stop come back from RouteLogic as the driver works through the trip, so the warehouse sees progress without calling the cab.
5. Proof of delivery
The driver's proof of delivery — signature, photo, timestamp and receiver name — is attached to the shipment. A refusal, damage or failed delivery arrives on the same channel and becomes a return receipt in the warehouse instead of a phone call.
6. Relayed to the order source
BizBloqs relays the tracking code and the delivery status back to whichever system the order came from, and onward to the customer-facing channel. The warehouse is the single point where shipment truth is collected, and every downstream system reads the same value.

Where the tracking code is relayed to

BizBloqs holds the shipment truth and pushes it outward. Which of these run depends on which systems you have connected.

ERPThe shipment confirmation carries the carrier, the parcel numbers and the tracking codes, so the ERP can invoice and answer a where-is-my-order question without opening the WMS.
WebshopThe fulfilment posted to the webshop includes the carrier and the tracking code, which triggers the platform's own shipping confirmation and fills the my-account order page.
Marketplace channelMarketplaces score you on it, so the tracking code goes back on the channel's own shipment message inside the promised window, per colli where the channel supports it.
Customer notificationWhoever owns the customer relationship sends the notification: the carrier, the webshop or your ERP. BizBloqs supplies the code; it does not send marketing mail on your behalf.
Warehouse and service deskIn BizBloqs the shipment shows its current status and history, so a service desk can trace an order end to end — pick, pack, parcel, carrier status, proof of delivery — in one screen.

Which statuses and documents are available depends on how RouteLogic is set up and on what your drivers register: not every trip produces a signature or a photo, and a customer-facing tracking link is only as good as the ETA behind it. We confirm what you will actually receive before go-live.

How we roll it out

1. Discovery
We walk through your current RouteLogic setup and agree which objects are in scope and which system is leading per object.
2. Connection
The technical connection is established on a test environment first, so you can see real data moving before anything touches your live operation.
3. Mapping and testing
Fields, codes and exceptions are mapped and tested with your own orders — including the ones that normally go wrong.
4. Go live
We go live with your team on the floor, monitor the first days closely and hand over a connection your people can read themselves.

Does your process fit this message set?

This is our standard RouteLogic integration. If you need messages that are not in the table, send us your list — we tailor integrations per customer through workflows and will tell you upfront what is standard and what is custom.

Book a technical session Send us your message list

COMPANIES THAT RUN THEIR WAREHOUSE ON BIZBLOQS

More than 200 implementations across wholesale, manufacturing, e-commerce and third-party logistics.

OUR SOLUTIONS

BizBloqs has developed a unique platform which can be configured to create many solutions for every logistic challenge we have encountered.

Every one of these routes runs on the same platform and connects to RouteLogic — so whichever route fits you today, the integration does not have to be rebuilt when you move to the next one.

SME

Get off paper. Get in control.

Small and medium businesses running one warehouse, a growing order volume and a team that is doing too much by hand.

Real-time stock accuracy instead of period-end guesswork
Picking errors drop because the system directs every movement
New warehouse staff become productive in days, not weeks

Explore this solution SME+

Multi-channel, multi-warehouse, still fast to change.

Scaling mid-market businesses selling across several channels, holding stock in more than one place, and outgrowing a single-warehouse setup.

One truthful stock position across every warehouse and channel
Orders allocated automatically by rules you control
Oversell and stock-out incidents drop sharply

Explore this solution Enterprise

Multi-entity, deeply integrated, fully auditable.

Larger and multi-entity organisations with complex handling requirements, established ERP landscapes and formal governance obligations.

Complex handling requirements met without custom development
ERP, BI and trading-partner integration through one toolkit
Intercompany flows managed as a first-class process

Explore this solution

Integration FAQ

We plan our own fleet in Excel today — what changes?

The planning moves into RouteLogic and the load data behind it becomes real. Most of the gain is not the algorithm; it is planning against colli that actually exist.

Does the driver app status reach our office?

Yes. Delivery status and refusals are booked back on the order, so customer service and the warehouse see the same outcome.

What happens if the RouteLogic connection drops?

Messages are queued and replayed. Warehouse work continues in BizBloqs during an outage; the queue drains once the connection is restored, and failed messages stay visible instead of disappearing silently.

Can we change the standard message set?

The table above is our standard integration with RouteLogic. Extra messages, different field mappings or customer-specific rules are handled through workflows in BizBloqs — we tell you upfront what is standard and what is custom work.

How long does connecting RouteLogic take?

The connection itself is a matter of days. The realistic timeline is set by mapping and testing, and by how clean your product data and process agreements already are.

BEFORE YOU DECIDE

Check the fit from another angle

IndustriesHow your operating model changes the setup.VerticalsSector-specific requirements, from food to spare parts.ROI calculatorPut your own volumes in and see what the current way of working costs.What is a WMS?Where the ERP stops and warehouse management starts.

Hear directly from our customers

Why take our word for it? We let our customers convince you instead. BizBloqs customers are happy with their solutions and don’t hesitate to share their positive experiences. Our ability to turn any challenge into an efficient solution never fails to impress!

Caressi

BizBloqs was one of the first to provide a WMS with scanning capabilities and we started a journey together. Our operations have gotten a lot more complex, advanced and especially bigger over the past 5 years and we have simply grown together.

Nick Bisselink, Financial/Operational Director

Lantaarn

When we had extensive logistic requirements beyond the capabilities of our financial solution, BizBloqs shared its expertise to transform Lantaarn’s entire warehouse experience together

Lantaarn Publishers

Fairplant

We needed a better, more transparent and practical system for our incoming and outgoing product flow. A direct overview in our stock and all our logistics movements was really a must. BizBloqs helped us from the start!

Rik Klein - Sales manager

Neeltje Jans

In addition to a scan procedure with EDI integration, BizBloqs has set up an entire production system for us. Production planning can provide direct instructions and as soon as they are ready, it all arrives in the OMS. This gives us a larger production capacity and a drastic reduction of the picking mistakes in dispatching.

Reinier Schot, Head of Production

Caressi

Nick Bisselink, Financial/Operational Director

Lantaarn

When we had extensive logistic requirements beyond the capabilities of our financial solution, BizBloqs shared its expertise to transform Lantaarn’s entire warehouse experience together

Lantaarn Publishers

Fairplant

Rik Klein - Sales manager

Neeltje Jans

Reinier Schot, Head of Production

Caressi

Nick Bisselink, Financial/Operational Director

Lantaarn

When we had extensive logistic requirements beyond the capabilities of our financial solution, BizBloqs shared its expertise to transform Lantaarn’s entire warehouse experience together

Lantaarn Publishers