Space utilisation
A warehouse has 6,000 pallet locations, and 5,100 of them hold a pallet. That is 85 per cent. How much of the space you pay for actually contains stock is called space utilisation (warehouse space utilization in American spelling).
How to calculate space utilisation
There are two sums, and you want both, because they answer different questions.
Location occupancy is occupied locations divided by available locations. It is quick, your system already knows it, and it answers the practical question: is there somewhere to put the next pallet.
Volume fill is the volume of the goods divided by the volume of the space they stand in. It is harder to get, and it answers the expensive question: how much air are you paying to store. A location holding one pallet stacked to half the height of the opening counts as full in the first sum and as half empty in the second.
A third figure belongs beside them: how much of the floor is storage at all. Aisles, staging areas, the packing area and the returns bench are all needed and none of them holds stock, and the split between storage and everything else is a design decision and not an accident.
There is no good number, and the ceiling is not 100
This is the one measure in this series where more, beyond a point, is not better. Above about 85 to 90 per cent of locations, a warehouse runs out of convenient places. Put-away runs get longer, pallets land in a second-choice location and are moved again later, and pickers walk further because the fast movers could not be placed where they belong.
A site at 97 per cent occupancy is therefore not efficient. It is full, and the cost of being full shows up in the labour figures and not here. Read this measure next to throughput and labour hours, and treat rising occupancy with falling productivity as one event seen twice.
A worked example
The warehouse has 6,000 locations, 5,100 occupied, so location occupancy is 85 per cent.
Now measure the volume. The clear opening of a location is 1.80 metres, and the average pallet in the building stands 1.10 metres high, so an occupied location is 61 per cent full. Multiplied by the 85 per cent occupancy, the racking holds goods in about 52 per cent of its own volume.
That remaining 48 per cent is the cheapest storage available, and the ways into it are mostly beam heights set to the wrong profile, one racking configuration for items of very different heights, and half-emptied locations kept for a single item. Before you rent a second building, this is the number to attack. The figures here are an example.
What moves the number
- Location dimensions against real pallet heights. One beam configuration for the whole building guarantees wasted height across most of it.
- Honeycombing. Half-emptied locations kept for one item. Allowing two items in a location fixes it and costs picking accuracy, so it is a trade and not a cure.
- Aisle width against the truck fleet. Narrower aisles with the right truck turn floor into locations, and that is an investment decision and not a tidy-up.
- Dead and slow stock. The long tail takes prime locations it has not earned. See dead stock.
- How much stock you carry at all. Utilisation and days of inventory are the same question, asked from the warehouse and from finance, and the space is one of the five items in the inventory holding cost.
- Peak planning. Overflow space rented for eight weeks usually costs less than a building sized for November all year.
Frequently asked questions
Locations or cubic metres?
Both, and the gap between them is usually where the free space is. Location occupancy is easy to count and says whether another pallet fits. Volume fill says how much air you pay for inside the pallets you already have.
Why is 100 per cent bad?
Because above about 85 to 90 per cent of locations there is no convenient place left to put anything. Put-away runs get longer, pallets are handled twice, and the warehouse slows down while the report says all is well.
Do aisles count as used space?
Not as storage, but they have to show up somewhere. Keep a separate figure for how much of the floor is storage at all. In most buildings a third or more goes to aisles, staging, packing and returns, and that split is a design decision worth seeing.
What about the seasonal peak?
Measure the peak and the trough. A building that is relaxed in March and blocked in November has a peak problem, and the yearly average describes neither month.
Ready to see BizBloqs on your own process?
Book a demo and we will walk your warehouse and order flow end to end — inbound, storage, picking, shipping, returns — and tell you honestly what BizBloqs would change.
Two questions about your own operation
How many of your articles sit in a pick location they empty less than once a month?
Part one: Laying out a warehouse does not start with the racking
After your last integration, how many systems hold a stock quantity for the same item? Name them.